Eastwood 12032Z Underhood Black Matte Aerosol 11 oz

Description

Underhood Black Matte is the correct shade of black, having just the right matte finish many older car manufacturers used on radiator supports, inner fenders, firewalls, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a “factory-like” finish. This acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that will not hide surface details. Made in the USA. Coverage approx 6 sq ft. per can. 5%-9% Gloss Level.

Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. It is better to apply several light coats than one heavy coat. Ideal conditions 70°F to 90F° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.

Safety Information:

Use this product in a well ventilated area and wear a respirator.